Markforged Resources
Learn
AMPC
ํธ์ฃผ ์ก๋ฅ ๊ฐ๊ณต์
์ฒด(AMPC)๊ฐ Markforged์ ์ ์ธต ์ ์กฐ ๊ธฐ์ ์ ํ์ฉํ์ฌ ์ก๋ฅ ๊ฐ๊ณต ์ฐ์
์ ์ด๋ป๊ฒ ํ์ ํ๊ณ ์๋์ง ์์๋ณด์ธ์. ์ด ํ์ ์ ์ธ ํ์
์ ์ง์์ ์ธ ์ฅ๋น ์ด์์ ๋ณด์ฅํ์ฌ ๋ค์ดํ์ ์๊ฐ์ ์ต์ํํ๊ณ ์ค์ ๋ถํ์ ์จ๋๋งจ๋ ์์ฐ์ ํตํด ๋น์ฉ์ ํฌ๊ฒ ์ ๊ฐํฉ๋๋ค.
Eiger์ ์๋ก์ด ROI ๋๊ตฌ๋ก ๋น์ฉ ์ ๊ฐ ํจ๊ณผ ์ ์ฆํ๊ธฐ
ROI ๋์๋ณด๋๋ ๋น์ฆ๋์ค๋ฅผ ์ํด์ ๋ฐ์ดํฐ ๊ธฐ๋ฐ์ ๋น์ฉ ํจ์จ์ ์ธ ์์ฌ๊ฒฐ์ ์ ๋ด๋ฆฌ๋ ๋ฐ ํ์ํ ๋ฐ์ดํฐ๋ฅผ ์ ๊ณตํฉ๋๋ค.
Goierri Eskola
Goierri Eskola, an educational institution in Spain's Basque Country, has significantly advanced its training capabilities and industry collaboration by integrating the Markforged Metal X system into its curriculum.
PTI Tech
PTI Tech uses Markforged metal binder jetting to accelerate MIM prototyping, significantly reducing the development time and cost for high-precision, durable elevator button assemblies. This innovative approach bypasses traditional pre-production tooling, allowing for rapid prototyping and efficient design validation.
Performance Advisor ์๊ฐ : ํด๋ฆญ ํ๋ฒ์ผ๋ก ๋ ๊ฐ๋ ฅํ ํํธ ํ๋ฆฐํธ
Performance Advisor๋ ์ฌ์ฉ์ ์
๋ ฅ ์์ด ์๋์ผ๋ก ๋ ๊ฐ๋ ฅํ ํํธ๋ฅผ ํ๋ฆฐํ
ํ ์ ์๋ ๋น ๋ฅด๊ณ ์ฉ์ดํ ๋ฐฉ๋ฒ์
๋๋ค.
Hawaya Racing, Inc
Hawaya Racing specializes in the research, development, and manufacturing of Harley-Davidson drag racing motorcycle parts and safety equipment. In 2022, Hawaya Racing, Inc. purchased a Markforged X7 through Phillips Corporation. The X7 was chosen for its ability to replace CNC-machined parts with highly durable composites using Continuous Fiber Reinforcement (CFR).
๋น์ฉ ํจ์จ์ ์ธ ๊ฐ๋ ํฅ์์ ์ํ ์๋ก์ด ์ฌ์ ๋ ์ด์์ ์ฌ์ฉ์ ์ ์ ํด
FX10 ์๊ฐ: ๊ณต์ฅ ํ์ฅ์ ์ํด ์ค๊ณ๋ ๊ฐ์ฅ ๋ค์ฌ๋ค๋ฅํ ์ฐ์ ์ฉ 3D ํ๋ฆฐํฐ
FX10์ Markforged์ ์ฐจ์ธ๋ ์ฐ์
์ฉ ๋ณตํฉ์ฌ 3D ํ๋ฆฐํฐ์
๋๋ค. Markforged X7์ ์ฑ๊ณต์ ๊ธฐ๋ฐ์ผ๋ก ์ ์๋ FX10์ ๋ชฉ์ ์ ๋จ ํ๋,
์ค์ง ํ๋ฆฐํ
ํ ๋๋ง๋ค ๊ฐ๋ ฅํ๊ณ ์ ํํ ํํธ๋ฅผ ์์ฐํ๋ ๊ฒ์
๋๋ค.
ํจ์จ์ฑ ํฅ์: ์ฐ์ ์๋ํ ๋ถ์ผ์ ๋ก๋ดํ ์ข ๋จ์ฅ์น(EOAT, End-of-Arm-Tooling) ๋ฐ 3D ํ๋ฆฐํ
ํด๋ง ์ค๊ณ๋ ๋ก๋ด ์๋ํ์ ํจ์จ์ฑ, ํ์ง, ๋น์ฉ ํจ์จ์ฑ์ ์ง์ ์ ์ผ๋ก ์ํฅ์ ๋ฏธ์น๊ธฐ ๋๋ฌธ์ ์ฐ์
์์ฐ์ ์์ด EOAT๋ ๋งค์ฐ ์ค์ํฉ๋๋ค.
Sonic Communications
With Markforged, Sonic Communications can go from design to final product in a quarter of the time it would take with in-house machining.