Beautiful Kevlar® and Nylon Powder Baskets for Ski Season
Beautiful Kevlar® and Nylon powder baskets that make perfect use of the material properties. The nylon flexes to absorb impact and transmits the force to the kevlar.
Chris Hayes also optimized the layout of the fiber in the MarkForged software - see the screenshot below for a detailed view of the Kevlar® layers.
From the Thingiverse listing:
- 100mm powder basket
- Hole is 10.5mm at the top, tapered 1 degree
If you are printing on a Markforged Mark One, I highly recommend you download one of the included .mpf files and print from a USB. I put a lot of work into the fiber layout and you won't get that with just the .stl.
- Rev C features larger (cooler looking) slots and the REV B updates
- Rev B has been updated with a larger (1.125mm) bottom edge fillet that MarkForged will not remove with "thin features" turned off and better surfacing on the cutaway at the back
- In the .mfps, each basket uses 17.3cc nylon (REV C) or 18.4cc nylon (REV B) and 2.3cc kevlar (both revs).
All of the blogs and the information contained within those blogs are copyright by Markforged, Inc. and may not be copied, modified, or adopted in any way without our written permission. Our blogs may contain our service marks or trademarks, as well as of those our affiliates. Your use of our blogs does not constitute any right or license for you to use our service marks or trademarks without our prior permission. Markforged Information provided in our blogs should not be considered professional advice. We are under no obligation to update or revise blogs based on new information, subsequent events, or otherwise.
Never miss an article
Subscribe to get new Markforged content in your inbox