Carl Calabria’s Guide to Using Inserts on the Mark One
You may have noticed already that Carl Calabria keeps things organized here at MarkForged. He keeps the tools clean and organized; this both increased productivity and sets the tone for a clean, organized company culture. Carl is also a fan of constantly improving, so he designed this part to both organize the tool set used to maintain a Mark One 3D printer and to improve his additive manufacturing skills.
This Mark One Maintenance Toolset Caddy contains all the bits and sockets used to service a Mark One 3D printer. It also includes two different types of inserts including 12 magnets to keep the bits in place. The inserts were added during printing using the pause function of the MarkForged printer and software.
A Step by Step Guide to Adding Inserts
1. CAD the caddy in OnShape, leaving cavities for the razor blade and 12 magnets in OnShape
2. The razor blade cavity and magnet cavities are continuous
3. No need to separate them with nylon
4. The razor blade is there because the magnets in the first version jumped out and stuck to the print head
5. Export from OnShape as a STL
6. Import the STL into the MarkForged Eiger Software
7. Click Part View
8. Click 2d view
9. Add pauses at two points
10. Scroll to select cavity layer using the layer selector at the bottom
11. Insert the first pause at Layer 10, to insert the razor blade
12. Put second pause at layer 40, to insert the magnets
13. Click pause after layer at the upper right
14. Start the print and stare in wonder as the build starts
15. When layer 10 pauses, insert the razor blades, with a thin layer of glue stick applied to the top of the razor blades
16. Click resume print on the touchscreen
17. Add some glue over the magnets, to ensure adhesion
18. Click resume print on the touchscreen
19. The rest of the caddy will print on top of the magnets
- The height of cavity should be the same size as the embedded part
- If cavities are taller, you'll be printing in midair and can have a print failure
- If too short, the print head will bump into the inserts
- Glue on the inserted hardware ensures adhesion of the layer above the inserts
- Download the STL Here
- Download the MFP Here
All of the blogs and the information contained within those blogs are copyright by Markforged, Inc. and may not be copied, modified, or adopted in any way without our written permission. Our blogs may contain our service marks or trademarks, as well as of those our affiliates. Your use of our blogs does not constitute any right or license for you to use our service marks or trademarks without our prior permission. Markforged Information provided in our blogs should not be considered professional advice. We are under no obligation to update or revise blogs based on new information, subsequent events, or otherwise.
새로운 정보를 놓치지 마세요
Markforged의 최신 컨텐츠를 편지함으로 받으시려면 구독하십시오.