Pocket Hole Drilling Fixture
[This post was written by Carl Calabria, our Senior Vice President of Engineering]
Traditional woodworkers enjoy using dovetail and mortise and tenon joints to fasten pieces of wood together when glue alone will not sufﬁce. I count myself among them. When it comes to non-critical projects where speed trumps elegance, I will reach for my pocket hole jig every time.
This jig guides a specialized drill bit into the wood at a prescribed angle and to a speciﬁc depth. Next the pieces of wood to be joined are temporarily clamped together while a screw is driven through the pocket hole and into the other piece. The pocket hole jig I designed more than 15 years ago used components sourced from the Kreg Tool Company. It employs a pneumatic cylinder with a foot activated valve to clamp the work piece and a pneumatic drill to drive the bit. The jig clamped into my woodworking vise and was designed to work with stock in the 3/4”-1” range or the 1 1/2”-2” range. Switching between ranges involved unscrewing and repositioning the pneumatic cylinder, a tedious operation. I recently decided to upgrade the ﬁxture so that it could quickly be adjusted and handle stock up to 4” thick. I also added switchable magnetic clamps so that the jig can be quickly mounted on my tablesaw making it much easier to handle long work pieces.
The newly imagined ﬁxture is a great example of mixed material engineering. I used MDF (medium density ﬁberboard) for the base, extruded aluminum for the guides, a 3D printed bracket for the pneumatic cylinder using a Nylon substrate with embedded carbon ﬁber, and a pair of 3D printed Nylon knobs. Printing the bracket allowed me to integrate several features (right angle support for the pneumatic cylinder, guides for the aluminum rail, and provisions for securing the bracket at an arbitrary position along the rail) that greatly simpliﬁed the design process.
All of the blogs and the information contained within those blogs are copyright by Markforged, Inc. and may not be copied, modified, or adopted in any way without our written permission. Our blogs may contain our service marks or trademarks, as well as of those our affiliates. Your use of our blogs does not constitute any right or license for you to use our service marks or trademarks without our prior permission. Markforged Information provided in our blogs should not be considered professional advice. We are under no obligation to update or revise blogs based on new information, subsequent events, or otherwise.
Never miss an article
Subscribe to get new Markforged content in your inbox