Part of the Week — Dan Topjian’s Carbon Fiber Reinforced Phone Amplifier
Dan Topjian is the Senior Applications Engineer at MarkForged. When not on site helping customers or printing test parts, he's at his desk rocking out and testing the Eiger software that runs the MarkForged printer.
Dan's phone has an awkward design with the microphone on the bottom and speaker on the back. A holder with appropriately placed openings for a Samsung Note 4 was impossible to find, even on Amazon. So Dan printed one.
Dan used OnShape to CAD the holder. Of course, there is carbon fiber reinforcement since it was printed on a Mark One.
- The phone holder is shaped to direct the sound towards Dan's desk, sparing the rest of the office from Eye of the Tiger
- The cutout for the microphone allows Dan to use it as a speakerphone, too.
A couple of layers of carbon fiber are on the sides, because Eiger will add composites automatically.
Modeled by Dan Topjian, MarkForged Sr. Application Engineer
You can also download the Samsung Note 4 Amplifier on Thingiverse.
Samsung Note 4 Amplifier Stand: Size 76.19mm x 68.59mm x 88.89mm; Estimated Print Time ~32h; Nylon Cost ~$9.00; Carbon Fiber Cost ~$3.45; STL Download
All of the blogs and the information contained within those blogs are copyright by Markforged, Inc. and may not be copied, modified, or adopted in any way without our written permission. Our blogs may contain our service marks or trademarks, as well as of those our affiliates. Your use of our blogs does not constitute any right or license for you to use our service marks or trademarks without our prior permission. Markforged Information provided in our blogs should not be considered professional advice. We are under no obligation to update or revise blogs based on new information, subsequent events, or otherwise.
새로운 정보를 놓치지 마세요
Subscribe to get new Markforged content in your inbox