
Capable of printing parts 10x stronger than ABS – the X5 brings Continuous Fiberglass reinforcement to an industrial printing platform.
Continuous Fiberglass Parts
Print Fiberglass reinforced parts 10x stronger than ABS — capable of replacing some machined aluminum parts.
Material & Print Mode Variety
Print with Onyx, Onyx FR, and Continuous Fiberglass in a wide variety of print modes, including high-resolution printing.
Industrial Reliability and Accuracy
Precision-machined hardware, advanced sensors, and unique software drive industry leading accuracy and reliability. Only Markforged industrial 3D printers offer micron-level laser scanning for closed-loop calibration, reliably yielding parts with 50 μm repeatability and industry-leading surface finish.
Specs
Physical Dimensions
Width | 584 mm |
Depth | 483 mm |
Height | 914 mm |
Weight | 48 kg / 106 lbs |

Build Volume
Width | 330 mm |
Depth | 270 mm |
Height | 200 mm |

Printer primary Specs
- Printing Process
- Continuous Fiber Reinforcement (CFR)
- Z Layer Resolution
- 50 μm - 200 μm
- Printing Media
- Composite Base Filaments, Continuous Fiber
- Internal Part Geometry
- Closed Cell Infill with Continuous Fiber Reinforcement
- Print Bed
- Precision Ground Composite
Materials
Available Materials
System Details
About the X5
The Markforged X5 CFR industrial 3D printer combines precision-built hardware, advanced sensors, and best-in-class software to deliver accurate parts repeatably. It features a reinforced, precision-machined gantry and a precision ground print bed that can be removed and replaced with 10 μm repeatability. Each piece of hardware in the filament extrusion system — from the nozzles to the extruder hobs — is optimized to resist wear from micro carbon fiber filled nylon filaments and maintain print quality over thousands of hours. Out of material sensors ensure that you’re always printing while a scanning laser on the printhead enables the printer to dynamically adjust the first layers of a print to achieve perfect bed adhesion.
The X5 has a 3rd-generation fiber reinforcement system that enables you to lay down continuous fiber into parts. Only Markforged composite printers are capable of printing Continuous Fiberglass reinforced parts.
Materials
Leverage the power of Continuous Fiberglass reinforcement to print parts 10x stronger than plastic.
-
Onyx
Micro carbon fiber filled nylon offers excellent heat resistance, surface finish, and chemical resistance.
Onyx ESD
Stronger, stiffer, and ESD resistant Onyx variant for industrial and electronic manufacturing applications.
Onyx FR
Certified UL 94 V-0 rated flame-retardant nylon filled with micro-carbon fiber that possesses the same core properties as Onyx.
Fiberglass
Inexpensive and 11 times stiffer than ABS, Fiberglass is the perfect entry-level Continous Fiber for 3D printing functional parts.
The power of Continuous Fiberglass at your fingertips.
Software
3D Printing Software Meets Production Management
Design your part, upload it into our browser-based software, select a Composite Base filament, reinforce the part with Continuous Fiberglass, and hit print. It's that simple.
Try It YourselfProcess